If it’s accessible using primary IP on the main system , firewall is set or completely disabled and both client and server are on the same network, then I’m not sure. Unless there’s some kinda of network setting mismatch on the laptop or a configuration in Jellyfin not allowing connections outside the host , then I’m not sure. We did cover the basics, so I’m sorry it’s not working.

Ok. So you’re definitely not trying to use 127.0.0.1 remotely.

So on your phone’s web browser ( using the same WiFi ) if you visit http://<ip of mint system>:8096 and nothing happens then it’s the firewall on the mint system. You would need to allow ports 8096/8097.

I’ve never used Linux mint, but if it’s Debian based then it might be using UFW firewall.

First, check that if firewall is running. Open a terminal and type:

sudo ufw status

Step 2: Open ports 8096 and 8097

To allow traffic through ports 8096 and 8097, use the following commands:

sudo ufw allow 8096/tcp
sudo ufw allow 8097/tcp

This opens both ports for TCP traffic. If you also want to open the ports for UDP traffic, you can use:

sudo ufw allow 8096/udp
sudo ufw allow 8097/udp

Step 3: Verify the rules

Once you’ve added the rules, you can check the firewall status to verify the changes:

sudo ufw status

You should see entries for ports 8096 and 8097 allowing TCP (and/or UDP) traffic.

Step 4: Reload firewall (if necessary)

If the changes do not take effect immediately, you may reload the firewall using:

sudo ufw reload

Now, the firewall should allow traffic through ports 8096 and 8097.

Ok. What address are you using when trying access the server on your phone or Jellyfin client?

Edit: An address like this http://127.0.0.1:8096 or this http://<ip address of Linux mint system>:8096/

How? Like http://<ip of mint>:8096 in a web browser? On the same system running the server or is this a separate computer?

How do you know the server is worker fine? How are you accessing it to know that?

E:

Do you have a firewall running on your mint installation? If so have you allowed the ports (8096/8097)

Can you access the web client on the Mint installation http://<ip of mint>:8096

Can you use that same address on your phone / another computer to access it?

FYI If you’re using 127.0.0.1 that will not work on your phone or any client that’s not running the Jellyfin server.

When you use the Jellyfin app which server address are you putting in?

don’t act like taco bell is somehow the first chain to give someone food poisoning.

It’s one of the only chains with that reputation. It’s kinda of weird to brag about liking it so much but hey, you do you.

If you’re still eating from there, then it shouldn’t be long now.

I joke, but not really. You have to ask yourself, how is it possible that a little chicken, lettuce tomatoes with some sauce on a “tortillas” can make so many people sick.

I’m not saying it’s the right way, but I thought this had been possible for quite some time by using a safari extension like https://apps.apple.com/us/app/customize-search-engine/id6445840140

If you’re using invidious and have the web client, iOS or android client like Yattee… wouldn’t your default feed essentially be a playlist of all new videos?

Pornhub.com has nothing to do with Jesus.com

It’s funny how often this is brought up and how the answer is that’s it’s been solved since nearly the begging of the web.

I’ve been using an RSS manager / server for decades! Right now it’s FreshRSS as the server and using Lire as a client on iOS. There’s arguably no better way to consume content.

It seems that the commenter’s intention was clear to everyone except you. The commenter acknowledged the need for RAID software or a specific file system, mentioning that it had already been addressed. Understood the budget and OP being an newb.

Although their tone may have been blunt, they stayed focused on their original point.

But you just kept nagging. lol

Either way OP was helped and now you can sleep knowing you did your part. A true internet hero.

Then there has to be a firewall, web server whitelist or some kind of configuration issue with the service being hosted. Because according to all your responses they are on the same WiFi with the same subnet/gateway/netmask.

Same netmask?

When asking for network troubleshooting assistance, super useful to provide ANY kind of network info. So far we have WiFi and same subnet. Yet absolutely no details which are necessary to help form questions or provide answer.

Can you post the IP Netmask and Gateway of your Linux server and one of your mobile devices that can’t view the server?

Can you ssh into the Linux server from your mobile device?

Same. It’s been on my list for too long.

Your network is probably configured with inconsistent subnets / netmasks. iOS / Android are on WiFi and getting a different subnet/netmask than your severs.

Edit: What does pinging the server with nmap mean? Are you checking open ports or pinging the server? That doesn’t make sense or at least leaves us with more questions with the way you worded that. Although the nmap utility can provide both of those answers, I’m not sure that’s what you meant. Technically nmap and ping are two different tools.

Gwenview has a slide show option. Slideshow is not listed on the page, but it’s in the app.

Hhxhx

I do remember that. But I’m not saying it wouldn’t be capable of playing video out of the box. I’m saying having a built in terminal and photoshop is dumb. Focus on the thing you’re supposed to be doing well.

Or iCab of the late 90s.

Honestly I don’t think it’s much to ask to make the browser as lean as possible and have development focused on browsing and leave most of the rest to extensions. It’s kind more like where we were 14 years ago.

Edit: Features I wouldn’t mind built in would be much like what vibi suggested. Built in volume control , per tab. Stuff like that makes sense.

https://lemmy.blahaj.zone/comment/10198327