Semiconductor mfg firesales.
Or if you want to spend the 20+k you can buy from the manufacturer.
Oh power usage… that depends how much you need to cool down, and what setup you have. But usually they’re 3 phase and lots of amps…
Semiconductor mfg firesales.
Or if you want to spend the 20+k you can buy from the manufacturer.
Oh power usage… that depends how much you need to cool down, and what setup you have. But usually they’re 3 phase and lots of amps…
That can be done, just takes a more expensive Platten motor, and some more code in the control unit.
You can get “freezers” that will put part of their inside down to 250+c below their surroundings. (Helium cryocoolers)
If you’re very careful you can remove heat with electromagnetic energy.
Think of heat like someone on a rope swing, and electromagnetic energy as a push.
If you time, and angle your pushes very carefully you can slow the person on the swing. But it’s much easier to speed them up. Same with electromagnetic energy.
It could easily be done, but would only work if: you don’t stop the cycle manually by opening the door, or you are ok with the microwave quickly spinning your food (or liquid filled cup) to the starting position as soon as you do open the door.
Consentually… Sounds like a great way for a corporation to groom individuals into people who accept less than a liveable wage.
I don’t see anything that helps capitalism being done “responsibly”. It’s all done in the pursuit of all the money, and as soon as possible. Only rule is don’t break laws that have consequences higher than the profits gained.
Eventually nobody.
Capitalism isn’t about sustainability, it’s about making the most amount of profit in the shortest amount of time.
Eventuall you bleed everyone dry and nobody has a job. But for a short amount of time the shareholders will have had a huge number of 0’s and 1’s in a database somewhere equating to their “worth”
Definitely better inside your chest than outside it. So I hear.
Self fulfilling prophesy that works to generate more profit for the company.
You do understand how much energy (and therefore pollution) it takes to launch any significant mass above the karman line, right?
I have enphase inverters as well. I don’t find their data to be useful.
I went the route of installing two circuit setup boards running esp8266. One is installed in the subpanel in the garage where the solar feeds, the other is installed at the main panel on the main cables before any loads.
This way I can more accurately see production and usage. And can tell during production how much I’m actually utilizing before sending residual back to grid.
If I had only one panel and the solar fed directly into it, I’d use one of the 6 channel circuitsetup boards instead to monitor both solar feed and main.
But they are allowed to lie to you, and allowed to pull you over for perceived infractions. So, yes they can pull you over for “nothing”.
Why would those in power fix it? they are benefiting from the police keeping those with power in power. This way those in power don’t even have to pay the bonus they provide to the police.
Would this not require a battery as well, as usually the light is only lit while the door is open.
Making vacation even worse for said battery.
“the data collected by apps… Cannot reliably be used to harm me”
So you’re saying that someone can’t use your location, recordings of your audible surroundings, recordings of your devices camera view, and whom you may be interacting with cannot be used to harm you?
Also the fact that if you use a shared machine at all to login, it’s best practice to intentionally log out of everything, and clear cookies/cache when you’re done.
Proton has stopped the “visionary” that allows SMTP, now it’s only available in business accounts. :( I tried setting up the bridge CLI, but so far haven’t been able to get it to send anything after logging in and syncing the account, Maybe I’ll try again once I’ve got some things off my plate.
Setup rules that forward to an IP:port I used a guide on smarthomebeginner initially. I’ll try and find it found it.
Go here https://www.smarthomebeginner.com/traefik-docker-compose-guide-2022/
And scroll till the section. “Adding non-docker or external apps behind Traefik”
I think my experience is skewed by not having a dcfc capable car. I charge exclusively j1772. And use plugshare to find the chargers. In 5 years of ownership I’ve charged not at home probably 150 times. Of those times I would say I couldn’t get the charger to work maybe 20 times. And of those 20 probably half didn’t have any other option at the same location that I was able to get working.
Again this is skewed by filtering through plug share and not even attempting locations that have comments claiming they’re broken.