deleted by creator
deleted by creator
I’d recommend using distro you know best and/or most prefer to work with. I use the flatpak install of Jellyfin Media Player but there are also deb files available.
I’m currently using minipc with Intel n5105 (or something similar) for 1080p HTPC. Debian 12 OS with auto-login & Jellyfin Media Player starting at login. I control it with pepper jobs RF remote but also have a logitech wireless keyboard+touchpad for it. Keyboard+touchpad come in handy when browsing media sites on firefox but some might restrict quality. Some of the newer minipc’s I tried required adding backports repo to install newer kernel for wifi to work. I had been playing with Debian a lot when I set up first one & been using clonezilla to image them so it’s stuck.
Ordered a gmtek n97 minipc to play with and should have it in about a week. Going to test it out with 4k but it’s not a deal breaker for me if it cannot handle that well enough.
Yep, asking for something I’m sure a lot of us would love to have, a ready to go TV remote control style usage, but rather than having discussions about why those options aren’t viable just downvoting.
Create a backup image from the working SD card. Write that backup image to a spare SD card and verify it works. Then try to do ‘apt update’ and see if anything breaks. If it breaks you got a spare SD card ready to go :)
I had issues with DNS checks and traced it to my pihole. I changed that container’s resolv.conf to use cloudflare DNS and it has been working fine since. It was with Caddy so needed to change over to use IPs.
Another thing to remember is the client needs to support decoding the video in hardware or have enough CPU to handle it in software. I have intel i7 (3rd gen) with no hardware HEVC/x265 support but it has enough CPU to power through.
Self-host your own ACME server. Then you can use certbot pointed there.
These instructions are old so not sure if newer/better ways, https://blog.sean-wright.com/self-host-acme-server/
Is MariaDB on spinning disk or ssd?
I initially set up Nextcloud with MariaDB on spinning disk but it was slow even completely empty. I moved that container to ssd & performance was a lot better. The web UI may still have some slow loading parts but I can’t say for sure since rarely use it. Caldav+carddav+Nextcloud client are how I usually interact with it.
Sounds like bridge mode is needed for the vm’s network interface in virt.
I would say proxmox ve is easier to start with.
The container method used should be whatever you are more familiar with or prefer. They both have their own quirks, pros, & cons.
SELinux - If you don’t want to deal with SELinux then set it to permissive mode. If you want to keep in enforcing mode you need to create the appropriate policies, https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/using_selinux/configuring-selinux-for-applications-and-services-with-non-standard-configurations_using-selinux
Firewall - If you don’t want it’s protection then look up instructions to stop & disable it on your distro.
Port forwarding - From linux container side you either need to specify host networking or the ports you want to allow through, there is no avoiding that if it needs to be network accessible. If you want it internet accessible then you need to setup port forwarding on your router.
Have you looked into something like yunohost? It may be the kind of thing you’re looking for.
If router supports it, a static route via connected machine with IP forwarding enabled might work. OpenWrt has packages for things like tailscale and zerotier so could do it without an extra machine too.
For 3, if router supports it could also try doing static route via Tailscale joined machine that has IP forwarding enabled
If your router lets you try adding a static route for the tailscale IP/subnet to the laptop with IP forwarding enabled.
Yep, I only played through couple races & was a few beers in, it felt acceptable for me at the time. Not sure how it would be with the latest gen Elgato cards & they are pricey so best to buy from store with a good return policy.
I have never seen a capture device with USB interface have any kind of usable latency, you’ll want one with PCI Express interface.
Elgato makes a capture card with PCI Express interface, I had a friend who used one to play all of his consoles on big virtual screen in VR. I tried out Mario Kart 8 for the Switch and it played great.
My mother used to regularly do photo albums with family photos before we all went digital so I’ve been looking for a solution for years. Nextcloud has been decent with a few apps installed. Only done a couple small albums & worked for my needs. The face detection is alright but cheap cameras, blurry photos, and random mix of internet saved photos doesn’t help, lol. The map view works really well for photos with GPS data. I have my phone setup to automatically upload all new photos to Nextcloud too. Lately been working on plans to share access with my family over zerotier so they can view and upload their own to share back with me.
Was it the official container image or 3rd party? Whichever it was, they should get notified so that init script can get fixed to prevent similar happening to others.
Intel Quick Sync video saw a lot of improvements on 8th gen & since it’s all so old the pricing differences between 7th & 8th gen are going to be negligible.
Yep, 8th gen (Coffee Lake) saw a lot of improvements in Intel Quick Sync, https://en.wikipedia.org/wiki/Intel_Quick_Sync_Video#Hardware_decoding_and_encoding
My first zigbee device was Sylvania (73685) rgbw led strip. On it’s own it worked fine but once I started trying to add sengled zigbee bulbs I kept having problems with pairing the bulbs or keeping them connected. Zigbee uses 2.4ghz so I thought maybe interference so lowered power output on wifi AP 2.4ghz band & even turned it off for testing but didn’t help. I think I read somewhere that sylvanias caused that problem. I unplugged sylvania led strip, reset & rejoined everything else and had zero problems. Tried to add the sylvania back in and disconnect problems came back after awhile. It was past the return period so now I keep it unjoined and plugged into a zigbee smart outlet. I sometimes have to remove power from it to join new devices or when I restart zigbee controller. Currently have mix of sengled bulbs, thirdreality plugs, sonoff plugs & sensors, and single aqara tvoc all working together fairly reliably.